No, the Slim LED Strip Light # TN84ZR is designed for flat surfaces so it's not going to accommodate a curved surface.
Your best bet would be to use a standard LED strip like the Replacement LED Light Strip for Solera RV Awnings # LC423331 which can be used on curved surfaces. view full answer...
In regards to using the Optronics LED Light Strip 12-Volt Connector with Wire Leads part # A90PB with the Optronics Flexible LED Light Strips like part # UCL90CB, you'll need to make sure of two things. The first is that you are removing the double sides tape from the back of the light strip where it inserts into the connector. The second and the more important one is that you cut the light strip where indicated. The copper sections on the light strip would then line up with the silver... view full answer...
For a dimmable strip light the 7-1/2 inch Vision X LED Light Strip, # XIL-ST75, or the 12 inch, # XIL-ST12 is going to be the closest option. view full answer...
The Lippert 15-Foot LED Fabric Light Kit for Solera RV Awnings # LC674282 is intended to install by sliding into the light cord by the coach sidewall, under the awning, that is sewn into the awning fabric.
If you prefer an LED light strip that installs with an adhesive backing we offer 17-foot Optronics LED Light Strip # UCL90CB. This waterproof light strip has 3M peel-and-stick adhesive backing and a total of 300 diodes. Multiple light strips # UCL90CB can be joined together simply by... view full answer...
Sounds like it might be a wiring issue. Check to make sure your ground connection on the # ILL22CB is connected to a clean and bare metal. Also check to see if the power wire is connected securely and the wire is not touching any metal section of the trailer.
LED lights draw less power to operate over the traditional incandescent bulbs. If the lights are dimming when this light is turned on, then somewhere there must be a wiring short that is causing the power drain.
As for a LED light... view full answer...
Yes, the Optronics Flexible LED Light Strip part # UCL91CB can be dimmed when hooked up to an LED Compatible dimmer switch. We do carry these dimmer switches, part # 37215205. view full answer...
Yes, the Optronics Flexible LED Light Strip - Weatherproof - White - 17' Long # UCL90CB can indeed be wired directly to the battery on your camper.
Battery voltage is going to vary anywhere from 11 volts to 14 volts and won't damage the LEDs. view full answer...
LED trailer light kits for tailgates, such as The Universal LED Tailgate Fire Strip TLB-001 you were looking at or the Putco Red Blade LED kit # P92010-48, do in fact continue to power the circuit you have illuminated (such as running lights), while also illuminating the secondary circuit such as brakes or turn signals . In other words, you can have the running lights turned on and then engage the truck's brake lights which will illuminate that brake light on the LED strip, while still... view full answer...
Yes, the Optronics Flexible LED Light Strip part # UCL90CB can be cut to the desired length you need for your application. That said, there are cut lines on the strip you must use which are located every 2". Once the cut is made you can then use the Optronics LED Light Strip 12-Volt Connector with Wire Leads part # A90PB to make your connections. view full answer...
The LED light bar strip I recommend is # MCL93RB. Each strip has 3 LED lights on the base. They are sealed, waterproof and corrosion resistant. Contains both lead wire and ground wire for mounting to all surfaces.
The LED light bar strip # MCL93RB is a two wire system meaning you will have one wire with a ring terminal for your ground, and a 50-inch power lead wire. You will connect the white wire to your ground and the brown power wire lead to your power supply. view full answer...
The LED Light Strip part # DG52680 which is what you referenced is just a replacement light strip for a kit like the LED Light Strip Kit part # DG52688BU. The kit comes with the power adapter you were talking about as well as the remote and other components needed to charge the color and functions of the lights.
I am not really sure what you are asking but there would be no way to buy just the replacement strip and replacement power adapter part # DG52674PB and make this all work. view full answer...
The LED Light Strip - Weatherproof - Blue - 16' Long Item # DG52683 comes with two 4-pin connectors that will connect two strips together and to the 2-wire plug to power the LED strip. view full answer...
I have just what you need in the LED Light Strip Kit with Wireless IR Remote part # DG52694 which is a 33' long LED strip which allows you to choose between different colors and light settings. In regards to the section over the wheel wells that you don't want the LED strips to span, simply cut the strip at one of the recommend cutting points and then run a set of wires between the two ends over the wheel wells.
Please note, in order to attach bare wires to the end of the cut strip you... view full answer...
Nope! You do not need additional wire to link the separate light strips of the LED Light Strip Kit with Wireless RF Remote - Weatherproof - Dimmable - 7 Color - 16' Long # DG52688BU. It comes with a pair of 4-pin connectors that you use which will allow you to connect your light strips.
I have added a link to a video review of this kit for you to check out as well. view full answer...
Yes, the Optronics Flexible LED Light Strip, # UCL90CB hardwires to any 12-volt power source with a 2-Wire pigtail. What you described will work. view full answer...
The Smart LED Light Strip w/ App and Wireless IR Remote Control # DIA66QR has a male connector on one end of the strip to connect to the controller and a female connector on the other end of the strip to connect to additional LED strips. You would not be able to cut it and still connect to another strip. view full answer...
There is not a track per se, but you can use the Optronics LED Light Strip Connector - Snap On # A90P1B to mount the Optronics Flexible LED Light Strip # UCL90BCB. This will allow you to use something other than the sticky strip on the back of the lights and provide you with a great option to mount these on the rails on your pontoon boat. It does utilize a tacky substance, but it's designed to withstand some weather so it should work well for you. view full answer...
Yes, the Opti-Brite LED Strip Light for RVs part # ILL77CBB can be dimmed as long as you use an LED dimmer like the LED Dimmer Rocker Switch part # 37215225. view full answer...
There are a few different ways to wire/mount an LED light strip like the LED Utility Light Strip part # DG52761 on the bottom of your 1998 Jayco Eagle 12SO. In regards to mounting, you can use the double sided tape present just make sure the mounting surface is clean. Since you will be mounting the light on the underside of the trailer it will be subjected to much harsher conditions therefore, I recommend using either screws or zip ties as well as the double sided tape for security. In... view full answer...
There are 3 different mounting bracket styles depending on how exactly you're wanting to install the Premium Slim LED Strip Light # TN38ZR:
- Standard Mount # TN22VR
- 45 Degree Mount # TN34ZR
- 90 Degree Mount # TN54ZR
These different styles will get you the best angle setup you need for this light strip. view full answer...
Go To Results